HP storageworks 2/32, Руководство по установке

Страница: 83 / 138

Installing and Configuring the Edge Switch 2/32
83 Edge Switch 2/32 Installation Guide
Using HAFM from a Remote Location
Use this section to install the HAFM client on a remote workstation.
Remote Workstation Minimum Requirements
The following minimum requirements must be met in order to install HAFM on a
remote workstation.
Note: In order for HAFM to function properly, compatible versions must be installed on
both the client and server machines.
■ Windows, UNIX
®
or Workstation with color monitor, keyboard, and mouse
using:
— Intel
®
Pentium processor with a 200 MHz or greater clock speed, and the
Microsoft Windows 95, Windows 98, Windows ME, Windows 2000,
Windows NT
®
4.0, Windows XP, UNIX, or Linux 2.2 operating system.
— HP HA PA-RISC processor with a 360 MHz or greater clock speed, using
the HP-UX 11 or higher operating system.
— Sun Microsystems UltraPARC-II processor with a 300 MHz or greater
clock speed, using the SunOS Version 5.5.1 or higher operating system, or
Solaris Version 2.5.1 or higher operating system.
— IBM PowerPC microprocessor with a 233 MHz or greater clock speed, or
POWER3 microprocessor with a 333 MHz or greater clock speed, using
the AIX Version 4.3.3 or higher operating system.
■ At least 15 MB available on the internal hard drive.
■ 32 MB or greater RAM.
■ Video card supporting 256 colors at 800 x 600 pixel resolution.
■ Ethernet network adapter.
■
Java-enabled Internet browser, such as Microsoft Internet Explorer (Version
4.0 or later) or Netscape Navigator (Version 4.0 or later).