POST Error Messages
C-34
HP Servers Troubleshooting Guide
HP CONFIDENTIAL
Writer: Ted Weiman File Name: j-appc POST Error Messages.doc
Codename: Generic TSG Part Number: 161759-007 Last Saved On: 11/19/02 9:43 AM
Table C-9: 800 Series POST Error Messages
continued
Error Code
Audible
Beeps
Probable Source of
Problem
Action
806-NVRAM has
been reset
Please power off the
system and restore
SW1.2 to the default
position. Run BIOS
Setup to set default
values.
System Halted.
None
The system configuration
switch (SW1), position 2
has been turned on and
the system configuration
data has been cleared
from CMOS. This switch
must be returned to the
default off position for
normal operation and to
save configuration setup
data.
The system must be
reconfigured.
1. Remove power from the
system.
2. Locate the system
configuration switch
(SW1). Refer to your
server-specific user
documentation for
instructions.
3. Return position 2 to the
off position.
4. Restart the system.
5. Press
the
F10
key to run
the server setup utility
and configure the
system.
6. Select the primary
operating system.
7. Set the date and time.
8. Complete
additional
configuration as needed.
continued
