manualshive.com logo in svg

HP Spectre x360 Convertible 13-ac000, Руководство по техническому обслуживанию и ремонту, Страница: 43 / 75

Поделиться
Скачать
HP Spectre x360 Convertible 13-ac000 Скачать руководство пользователя страница 43

TouchPad

Description

Spare part number

TouchPad for use in models 13-w000 – 13-w099

907338-001

TouchPad for use in models 13-ac000 – 13-ac099

918034-001

TouchPad cable

907332-001

Before removing the TouchPad, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, 
turn the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 24

).

5.

Remove the battery (see 

Battery on page 26

).

Remove the TouchPad:

1.

Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then 
disconnect the  cable from the TouchPad.

2.

Remove the five Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the computer.

3.

Remove the TouchPad and cable (3).

Reverse this procedure to install the TouchPad.

TouchPad

35

Содержание Spectre x360 Convertible 13-ac000












































































Отзывы:

Нет отзывов