HP Scitex FB7600 страница 43 Скачать руководство пользователя

Страница: 43 / 52

Delivery Instructions

Unloading and moving the HP Scitex FB7600 printer and all system

components is the responsibility of the customer.
The system should be delivered to certified HP service engineers/installers,

unless otherwise notified by the your local Installation Manager.

Note

Do not unload and/or unpack the system without the presence and approval of the HP
Engineer/Installer. Delivering, unloading and conveying the FB7600 system should be
performed by a minimum of four persons, provided by the rigging company.

The HP Scitex FB7600 system (including accessories and media) is delivered to

the customer site in a total of 9 crates. For dimensions and weights of all crates,

see

Table 1-3

on page 27. The largest crate, which contains the machine’s main

frame, is delivered on an open flatbed truck. The rest of the crates arrive in a

closed truck with a box trailer.

Required Tools and Equipment

•

Crane accessories

- including steel beam, chains, heavy duty straps, etc., as

shown in

Figure 1-15

Figure 1-15 Crane Lifting Accessories – Steel Beam and Chain

4.5 m

2 chains

Steel beam

Содержание Scitex FB7600





















































Результаты поиска

Содержание Scitex FB7600

Отзывы:

Похожие инструкции для Scitex FB7600

Бренды по названию

Популярные бренды

HP Scitex FB7600, Руководство пользователя

Результаты поиска

Содержание Scitex FB7600

Отзывы:

Похожие инструкции для Scitex FB7600

Бренды по названию

Популярные бренды