![background image](http://html.mh-extra.com/html/hp/proliant-xl730f-gen9-server/proliant-xl730f-gen9-server_user-and-maintenance-manual_2175223044.webp)
Removal and replacement procedures 44
7.
Remove the front panel I/O board.
To replace the component, reverse the removal procedure.
I/O slot card
To remove the component:
1.
Power down the server (on page
2.
Disconnect all peripheral cables from the server.
3.
Remove the server (on page
4.
Remove the access panel (on page
5.
Disconnect the NIC-Y cable.
6.
Remove the I/O slot card assembly.
Содержание ProLiant XL730f Gen9 Server
Страница 8: ...Component identification 8 Server numbering in rack Serial label pull tab ...
Страница 14: ...Operations 14 2 Slide the access panel toward the front of the server The access panel locks into position ...
Страница 68: ...Acronyms and abbreviations 68 UEFI Unified Extensible Firmware Interface UID unit identification ...