background image

Illustrated parts catalog

Mechanical components

Hewlett Packard Enterprise continually improves and changes product parts. For complete and current
supported parts information, see the 

Hewlett Packard Enterprise PartSurfer website

.

Item

Description

Spare part number

Customer self-repair

1

Air baffle

867586-001

Mandatory

1

2

Right side panel

3

Access panel

869996-001

Mandatory

1

4

GPU adapter (GPU air baffle)

P04472-001

Mandatory

1

5

Left side panel

6

GPU accelerator blank

869995-001

Mandatory

1

7

Riser cross bracket

1

Mandatory—Parts for which customer self repair is mandatory. If you request Hewlett Packard Enterprise

to replace these parts, you will be charged for the travel and labor costs of this service.

2

Optional—Parts for which customer self repair is optional. These parts are also designed for customer

self repair. If, however, you require that Hewlett Packard Enterprise replace them for you, there may or
may not be additional charges, depending on the type of warranty service designated for your product.

3

No—Some Hewlett Packard Enterprise parts are not designed for customer self repair. In order to satisfy

the customer warranty, Hewlett Packard Enterprise requires that an authorized service provider replace
the part. These parts are identified as "No" in the Illustrated Parts Catalog.

1

Obligatoire—Pièces pour lesquelles le client doit procéder lui-même aux réparations. Si vous demandez

à Hewlett Packard Enterprise de procéder au remplacement de ces pièces, les frais de transport et de
main d’œuvre pour ce service vous seront facturés.

2

Facultatif—Pièces pour lesquelles une réparation par le client est facultative. Ces pièces sont également

conçues pour que le client puisse procéder lui-même aux réparations. Cependant, les frais

16

 Illustrated parts catalog

Содержание ProLiant XL270d Gen9































































































































Отзывы: