HP ProLiant WS460c Gen9 Скачать руководство пользователя страница 74

Страница: 74 / 102

Diagnostic tools 74

Active Health System

The HPE Active Health System provides the following features:

•

Combined diagnostics tools/scanners

•

Always on, continuous monitoring for increased stability and shorter downtimes

•

Rich configuration history

•

Health and service alerts

•

Easy export and upload to Service and Support

The Active Health System monitors and records changes in the server hardware and system

configuration. The Active Health System assists in diagnosing problems and delivering rapid resolution

if server failures occur.
The Active Health System collects the following types of data:

•

Server model

•

Serial number

•

Processor model and speed

•

Storage capacity and speed

•

Memory capacity and speed

•

Firmware/BIOS

Active Health System does not collect information about Active Health System users' operations,

finances, customers, employees, partners, or data center, such as IP addresses, host names, user

names, and passwords. Active Health System does not parse or change operating system data from

third-party error event log activities, such as content created or passed through by the operating

system.
The data that is collected is managed according to the Hewlett Packard Enterprise Data Privacy policy.

For more information see the Hewlett Packard Enterprise website (

http://www.hpe.com/info/privacy

The Active Health System, in conjunction with the system monitoring provided by Agentless

Management or SNMP Pass-thru, provides continuous monitoring of hardware and configuration

changes, system status, and service alerts for various server components.
The Agentless Management Service is available in the SPP, which can be downloaded from the Hewlett

Packard Enterprise website (

http://www.hpe.com/servers/spp/download

). The Active Health System log

can be downloaded manually from iLO 4 or HPE Intelligent Provisioning and sent to Hewlett Packard

Enterprise.
For more information, see the following documents:

•

iLO User Guide

on the Hewlett Packard Enterprise website

(

http://www.hpe.com/info/enterprise/docs

)

•

Intelligent Provisioning User Guide

on the Hewlett Packard Enterprise website

(

http://www.hpe.com/info/enterprise/docs

)

HPE ProLiant Pre-boot Health Summary

If the graphics server blade will not start up, you can use iLO to display diagnostic information on an

external monitor. This feature is supported on graphics server blades that support external video and

have a UID button or an SUV connector. When power is available to the graphics server blade but the

graphics server blade is not powered on, iLO runs on auxiliary power and can take control of the

graphics server blade video adapter to display the HPE ProLiant Pre-boot Health Summary.

Содержание ProLiant WS460c Gen9







































































































Результаты поиска

Содержание ProLiant WS460c Gen9

Отзывы:

Похожие инструкции для ProLiant WS460c Gen9

Бренды по названию

Популярные бренды

HP ProLiant WS460c Gen9, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant WS460c Gen9

Отзывы:

Похожие инструкции для ProLiant WS460c Gen9

Бренды по названию

Популярные бренды