36
The browser will return to the status page. The refresh may
take several minutes if the device was restarted.
Note:
Once the Rapid Startup Wizard has been completed the
Welcome page will become the default page.
Disk partitioning, RAID configuration, and failover
The four hard drives included in the 1500s are configured for
hardware RAID fault tolerance using the Adaptec 2410SA SATA
RAID Controller.
■
The Primary OS Logical Drive is configured as a 9GB RAID
1 mirror spanning drives 0 and 1.
■
The Secondary OS Logical Drive is configured as a 9GB
RAID 1 mirror spanning drives 2 and 3.
The Data volume is configured as a RAID 5 volume spanning the
remaining space across all four drives. The BIOS supports a boot
failover mechanism that will allow the system to automatically
boot to the next drive if a failure occurs on the previously booted
hard drive.
Table 6: RAID configuration by hard drives
Hard Drive 0
Partition C:
9GB Primary OS
Partition F:
User Data in RAID-5
Hard Drive 1
Partition C:
9GB Primary OS
Mirror
Partition F:
User Data in RAID-5
Hard Drive 2
Partition D:
9GB Backup OS
Partition F:
User Data in RAID-5
Hard Drive 3
Partition D:
9GB Backup OS
Mirror
Partition F:
User Data in RAID-5
Содержание ProLiant StorageWorks NAS 1500s
