HP ProLiant StorageWorks NAS 1500s, Руководство по установке

Страница: 30 / 54

30 NAS 1500s Installation Guide
Figure 6: RapidLaunch device discovery screen
9. Select the unconfigured HP StorageWorks NAS 1500s device
from the device list. If more than one displays, check the
serial number in the System Name column by clicking the
appropriate cell.
Note: Version 2.7.134 of the RapidLaunch utility displays the 1500s
as a 1200s.
10. Login to the WebUI. This launches the WebUI configuration
application (Rapid Startup) on the target HP StorageWorks
NAS device, as shown in
Figure 8 .
Note: The default login for the WebUI is
administrator
and the
password is
hpinvent
. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
11. Go to “ Rapid Startup Wizard configuration ” on page 34 to
complete the setup procedures.