HP ProLiant SL335s G7 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 83

background image

Diagnostic tools 75

HP Insight Remote Support software

HP Insight Remote Support software delivers secure remote support for your HP Servers and Storage, 24 X

7, so you can spend less time solving problems and more time focused on your business. You can have

your systems remotely monitored for hardware failure using secure technology that has been proven at
thousands of companies around the world. In many cases, you can avoid problems before they occur.

There are two HP Insight Remote Support solutions:



For small and midsize environments: HP Insight Remote Support Standard provides basic remote
monitoring, notification/advisories and service dispatch. It is optimized for environments with 1 to

50 servers and can be installed on a shared HP ProLiant Windows application server. The software
supports HP EVA storage devices, HP ProLiant, BladeSystems, HP Integrity and HP 9000 servers

running Microsoft Windows, Red Hat Enterprise Linux, Novell SUSE and Novell Netware. Download

from the HP website

For midsize and large environments: HP Insight Remote Support Pack (formerly Service Essentials
Remote Support Pack) is targeted for larger environments and is integrated with HP Systems Insight

Manager (SIM). It provides comprehensive remote monitoring, notification/advisories, dispatch and

proactive service support for nearly all HP servers, storage, network and SAN environments, plus

selected Dell and IBM Windows servers that have a support obligation with HP. It also enables HP to
deliver higher levels of proactive support in line with HP Mission Critical Services support

agreements. Download from the HP website

Both HP Insight Remote Support solutions are available at no additional cost to customers with a valid
warranty on HP technology, an HP Care Pack Service or HP contractual support agreement.
For more information, see the HP website

USB support and functionality

USB support

HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided

by the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB

devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available

normally. Specifically, HP provides legacy USB functionality for the following:



POST



RBSU



Diagnostics



DOS



Operating environments which do not provide native USB support

«
...
73
74
75
76
77
...
»

Содержание ProLiant SL335s G7




















































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant SL335s G7

Бренд: Razberi Страницы: 113

Бренд: Sun Fire Страницы: 66

Бренд: Jung Страницы: 16

Бренд: TYANO Страницы: 102

Бренд: Yawarra Страницы: 4

Бренд: Netstor Страницы: 17

totalstorage fastt100

Бренд: IBM Страницы: 160

Бренд: Kraun Страницы: 36

TVS- 72XU Series

Бренд: QNAP Страницы: 56

Бренд: Hitachi Страницы: 57

Бренд: Hitachi Страницы: 76

BladeSymphony 1000

Бренд: Hitachi Страницы: 52

Бренд: Hitachi Страницы: 91

Бренд: Hitachi Страницы: 174

HVM Navigator V03-06

Бренд: Hitachi Страницы: 312

NVM Navigator v03-07

Бренд: Hitachi Страницы: 316

Бренд: Hitachi Страницы: 129

Бренд: Hitachi Страницы: 466

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды