Physical
Drive
0
gl0079
Logical Disk 3
Data Volume
RAID 5
Logical Disk 2
DON’T ERASE Volume
RAID 5
Logical Disk 1
Operating System Volume
RAID 5
Physical
Drive
1
Physical
Drive
2
Physical
Drive
3
Physical
Drive
4
Physical
Drive
5
Figure 6 ML350 G5 hardware RAID
Table 7
shows additional information about the drive con
fi
guration.
Table 7 ML350 G5 six-HDD con
fi
guration
Logical
disk
RAID level
Size/allocation
Purpose
1
RAID 5
15 GB mirror across physical drives
Primary OS
2
RAID 5
5 GB mirror across physical drives
DON’T
ERASE
3
RAID 5
Remaining space across physical drives
Data
NOTE:
In the HP ACU, logical drives are labeled 1 and 2. In Microsoft Disk Manager, logical drives are displayed
as 0 and 1. For HP Smart Array con
fi
guration information, the E200 controller user guide can be obtained
from
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00688683/c00688683.pdf
.
The DON’T ERASE logical disk supports the recovery process only and does not host a secondary
operating system. If the operating system has a failure that might result from corrupt system
fi
les, a corrupt
registry, or the system hangs during boot, refer to "
System installation and recovery
" on page 109.
Data volumes are not carved at the factory or by the System Installation and Recovery DVD, and must
be con
fi
gured manually by the end user. Be sure to back up your user data, and then use the System
Installation and Recovery DVD to restore the server to the factory default state as soon as conveniently
possible.
Default boot sequence
The BIOS supports the following default boot sequence:
1.
DVD-ROM
2.
HDD
3.
PXE (network boot)
Under normal circumstances, the storage servers boot up from the OS logical drive.
HP ProLiant ML350 G5 Storage Server
29
Содержание ProLiant ML350 G5
