6 System installation and recovery
This chapter describes how to use the System Installation and Recovery DVD that is provided with your
storage server.
The System Installation and Recovery DVD
The HP ProLiant Storage Server System Installation and Recovery DVD allows you to install an image or
recover from a catastrophic failure. The DVD is used initially to install and con
fi
gure the operating system
and applications provided with your storage server.
At any later time, you may boot from the DVD and restore the server to the factory condition. This allows
you to recover the system if all other means to boot the server fails.
While the recovery process makes every attempt to preserve the existing data volumes, you should have
a backup of your data if at all possible before recovering the system.
To restore a factory image
1.
Connect keyboard, monitor, and mouse directly to the storage server.
2.
Insert the System Installation and Recovery DVD and boot the storage server. As the server boots
from the DVD, the main window appears.
Figure 14 System Installation and Recovery window
3.
Choose
Restore Factory Image
. On systems with only two physical drives, you are asked if you want
to do a complete restore of the system to factory condition (which destroys all user data), or if you
want to restore only the operating system and retain the user data volume.
HP ProLiant ML310 G3 Data Protection Storage Server
39
Содержание ProLiant ML310 G3 1TB
