![background image](http://html.mh-extra.com/html/hp/proliant-ml150-generation-2/proliant-ml150-generation-2_maintenance-and-service-manual_164851016.webp)
Removal and Replacement Procedures
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
2-7
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
3.
Open the bezel door fully to the right (1).
4.
Lift the bezel door and then pull it away from the chassis (2).
Figure 2-2: Removing the bezel door
To replace the bezel door, reverse steps 3 through 4.
NOTE: There is an EMI shield attached to the back of the bezel door for the SCSI non-hot-plug model.
To remove the EMI shield, remove the four screws securing the shield to the bezel door.