HP ProLiant ML10 Скачать руководство пользователя | Manualshive

Страница: 55 / 73

background image

Diagnostic tools 55

Diagnostic tools

HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the installation or
upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, or

HP contractual support agreement. HP Insight Remote Support supplements your monitoring 24 x 7 to ensure

maximum system availability by providing intelligent event diagnosis, and automatic, secure submission of

hardware event notifications to HP, which will initiate a fast and accurate resolution, based on your product’s
service level. Notifications may be sent to your authorized HP Channel Partner for on-site service, if

configured and available in your country. The software is available in two variants:

•

HP Insight Remote Support Standard: This software supports server and storage devices and is
optimized for environments with 1–50 servers. Ideal for customers who can benefit from proactive

notification but do not need proactive service delivery and integration with a management platform.

•

HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and
proactive service support for nearly all HP servers, storage, network, and SAN environments, plus

selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight

Manager. A dedicated server is recommended to host both HP Systems Insight Manager and HP Insight
Remote Support Advanced.

Details for both versions are available on the HP website To download the software, go to Software Depot Select

Insight Remote Support

from the menu on the right.

HP ROM-Based Setup Utility

RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of configuration

activities that can include the following:

•

Configuring system devices and installed options

•

Enabling and disabling system features

•

Displaying system information

•

Selecting the primary boot controller

•

Configuring memory options

•

Language selection

For more information on RBSU, see the

HP ROM-Based Setup Utility User Guide

on the Documentation CD or

the HP RBSU Information Library

«
...
53
54
55
56
57
...
»

Содержание ProLiant ML10










































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant ML10

Altos R700 Series

Бренд: Acer Страницы: 80

Altos G700 series

Бренд: Acer Страницы: 14

Бренд: Acer Страницы: 103

Altos R720 Series

Бренд: Acer Страницы: 104

Бренд: SEH Страницы: 50

SuperServer 6041G

Бренд: Supero Страницы: 114

Бренд: Integra Страницы: 40

Бренд: DNP Страницы: 93

Бренд: 3Com Страницы: 122

Бренд: Synology Страницы: 24

SuperServer 7089P-TR4T

Бренд: Supermicro Страницы: 155

Бренд: Asus Страницы: 82

Бренд: Asus Страницы: 32

Бренд: Asus Страницы: 42

RS100-E5 - 0 MB RAM

Бренд: Asus Страницы: 148

PIKE II 3008 Series

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды