HP ProLiant DL785, Руководство пользователя

Страница: 64 / 110

Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical
drive, assign RAID levels, and establish online spare configurations.
The utility also provides support for the following functions:
• Reconfiguring one or more logical drives
• Viewing the current logical drive configuration
• Deleting a logical drive configuration
• Setting the controller to be the boot controller
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configuration, refer to the controller user guide.
For more information regarding the default configurations that ORCA uses, refer to the HP
ROM-Based Setup Utility User Guide on the Documentation CD.
Array Configuration Utility
ACU is a browser-based utility with the following features:
• Runs as a local application or remote service
• Supports online array capacity expansion, logical drive extension, assignment of online
spares, and RAID or stripe size migration
• Suggests the optimum configuration for an unconfigured system
• Provides different operating modes, enabling faster configuration or greater control over
the configuration options
• Remains available any time that the server is on
• Displays on-screen tips for individual steps of a configuration procedure
For optimum performance, the minimum display settings are 800 × 600 resolution and 256 colors.
Servers running Microsoft
®
operating systems require Internet Explorer 5.5 (with Service Pack
1) or later. For Linux servers, refer to the README.TXT file for additional browser and support
information.
For more information, refer to the HP Array Configuration Utility User Guide on the Documentation
CD or the HP website (
http://www.hp.com
).
Re-entering the server serial number and product ID
After you replace the SPI board, you must re-enter the server serial number and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the Advanced Options menu.
3. Select Serial Number . The following warning is displayed:
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on
the chassis.
4. Press the
Enter
key to clear the warning.
5. Enter the serial number.
6. Select Product ID . The following warning is displayed.
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7. Enter the product ID and press the
Enter
key.
8. Press the
Escape
key to close the menu.
9. Press the
Escape
key to exit RBSU.
64 Software and configuration utilities