HP ProLiant DL585 Скачать руководство пользователя страница 31

Страница: 31 / 183

Server setup

3-8

HP ProLiant DL585 Server User Guide

Removing shipping bracket from PCI slots

To remove the shipping bracket from the PCI slots, loosen the thumbscrew and
remove and discard the shipping bracket.

Figure 3-1: Removing the shipping bracket

NOTE: The shipping bracket is used only to secure the PCI-X latches during shipment.

Server shipping contents

Unpack the server shipping carton, and locate the materials and documentation
necessary for installing the server. All the rack-mounting hardware necessary for
installing the server into the rack is included with the rack or the server.

The contents of the server shipping carton include:

•

Server

•

Setup documentation, Documentation CD, and software products

•

Power cords

•

Rack-mounting hardware

Содержание ProLiant DL585
























































































































































































Результаты поиска

Содержание ProLiant DL585

Отзывы:

HP ProLiant DL585, Руководство пользователя, Страница: 31 / 183

Результаты поиска

Содержание ProLiant DL585

Отзывы: