manualshive.com logo in svg

HP ProLiant DL560 Gen10, Руководство по техническому обслуживанию и ремонту, Страница: 84 / 125

Поделиться
Скачать
HP ProLiant DL560 Gen10 Скачать руководство пользователя страница 84

Systems Insight Display
LED and color

Health
LED

System
power LED

Status

Power supply (amber)

Amber

Green

One or more of the following
conditions may exist:

• Redundant power supply is

installed and only one power
supply is functional.

• AC power cord is not plugged into

redundant power supply.

• Redundant power supply fault

• Power supply mismatch at POST

or power supply mismatch through
hot-plug addition

Power cap (off)

—

Amber

Standby

Power cap (green)

—

Flashing
green

Waiting for power

Power cap (green)

—

Green

Power is available.

Power cap (flashing amber)

—

Amber

Power is not available.

IMPORTANT:

If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of
DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a
known working DIMM.

Drives

NVMe drive components and LEDs

Item

Description

1

Release lever

2

Activity ring

3

Do Not Remove LED

1

4

Request to Remove NVMe Drive button

84

 Drives

Содержание ProLiant DL560 Gen10






























































































































Отзывы:

Нет отзывов