HP ProLiant DL388p Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 128

background image

Regulatory compliance notices 104

radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to which the receiver is
connected.

•

Consult the dealer or an experienced radio or television technician for help.

Declaration of conformity for products marked with
the FCC logo, United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.
For questions regarding this product, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

•

1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded or

monitored.)

For questions regarding this FCC declaration, contact us by mail or telephone:

•

Hewlett-Packard Company

P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000

•

1281

-514-3333

To identify this product, refer to the part, series, or model number found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in

order to maintain compliance with FCC Rules and Regulations.

Canadian notice (Avis Canadien)

Class A equipment

«
...
102
103
104
105
106
...
»

Содержание ProLiant DL388p

































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL388p

LS42 - BladeCenter - 7902

Бренд: IBM Страницы: 194

8841 - eServer xSeries 236

Бренд: IBM Страницы: 100

Бренд: TYAN Страницы: 64

Бренд: Raidon Страницы: 20

Бренд: Olive Страницы: 19

Бренд: Seyeon Страницы: 10

FusionServer 1288H V5

Бренд: xFusion Digital Technologies Страницы: 96

Бренд: TRENDnet Страницы: 135

Бренд: Opengear Страницы: 4

Бренд: Alfresco Страницы: 49

Бренд: Kramer Страницы: 2

G4-Apex-ENT-80T

Бренд: Viavi Страницы: 11

G4-Apex-ENTERPRISE-HW

Бренд: Viavi Страницы: 8

Бренд: Promise Technology Страницы: 324

IMS-LANTIME M500

Бренд: Meinberg Страницы: 162

Бренд: Sonnet Страницы: 18

Бренд: Silicon Graphics Страницы: 72

Бренд: NASdeluxe Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды