HP ProLiant DL385 G5p Скачать руководство пользователя страница 25

Страница: 25 / 89

Removal and replacement procedures 25

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

Preparation procedures

To access some components and perform certain service procedures, you must perform one or more of the

following procedures:

•

Extend the server from the rack (on page

If you are performing service procedures in an HP, Compaq branded, telco, or third-party rack cabinet,
you can use the locking feature of the rack rails to support the server and gain access to internal

components.
For more information about telco rack solutions, refer to the RackSolutions.com website
(

http://www.racksolutions.com/hp

•

Power down the server (on page

If you must remove a server from a rack or a non-hot-plug component from a server, power down the
server.

•

Remove the server from the rack (on page

If the rack environment, cabling configuration, or the server location in the rack creates awkward
conditions, remove the server from the rack.

Extend the server from the rack

Pull down the quick release levers on each side of the server.

Extend the server from the rack.

WARNING:

To reduce the risk of personal injury or equipment damage, be sure that the rack is

adequately stabilized before extending a component from the rack.

Содержание ProLiant DL385 G5p


























































































Результаты поиска

Содержание ProLiant DL385 G5p

Отзывы:

Похожие инструкции для ProLiant DL385 G5p

Бренды по названию

Популярные бренды

HP ProLiant DL385 G5p, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL385 G5p

Отзывы:

Похожие инструкции для ProLiant DL385 G5p

Бренды по названию

Популярные бренды