HP ProLiant DL385 G5p Скачать руководство пользователя страница 24

Страница: 24 / 89

Removal and replacement procedures 24

Removal and replacement procedures

Required tools

You need the following items for some procedures:

•

T-10/T-15 Torx screwdriver (provided inside the server)

•

HP Insight Diagnostics software ("

HP Insight Diagnostics

" on page

)

Safety considerations

Before performing service procedures, review all the safety information.

Preventing electrostatic discharge

To prevent damaging the system, be aware of the precautions you need to follow when setting up the system

or handling parts. A discharge of static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage:

•

Avoid hand contact by transporting and storing products in static-safe containers.

•

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

•

Place parts on a grounded surface before removing them from their containers.

•

Avoid touching pins, leads, or circuitry.

•

Always be properly grounded when touching a static-sensitive component or assembly.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.

•

Unplug the power cord from the power supply to disconnect power to the equipment.

•

Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

Содержание ProLiant DL385 G5p


























































































Результаты поиска

Содержание ProLiant DL385 G5p

Отзывы:

Похожие инструкции для ProLiant DL385 G5p

Бренды по названию

Популярные бренды

HP ProLiant DL385 G5p, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL385 G5p

Отзывы:

Похожие инструкции для ProLiant DL385 G5p

Бренды по названию

Популярные бренды