System Setup and Configuration for Novell NetWare 5.1
Creating Novell Storage Service Volumes
To create NSS volumes to be used in the cluster:
1.
Type
NWCONFIG
from the system console.
2.
Select
NSS Disk Options, Storage, Assign Ownership.
3.
Select one logical unit (LUN ) at a time and click
Yes
to initialize.
4.
Repeat steps 2 and 3 for each shared LUN. Exit the utility.
5.
Type
NWCONFIG
from the system console.
6.
Select
NSS Disk Options, NSS Volume Options, Create, NSS Volume.
7.
Select a LUN and give the LUN a name.
8.
Click
Yes.
NOTE:
You should receive a message that reads
Successfully created the
new NSS Volume and added it to NDS.
9.
Repeat steps 7 and 8 for each LUN.
To configure the second server to see the NSS volumes:
1.
Type
NWCONFIG
from the second server system console.
2.
Select
NSS Disk Options, Storage, Update Provider Information.
3.
Update both the GSEG (Group/Segment Manager) and the MMPRV (NSS Media
Manager Provider). Exit the utility.
4.
Type
NSS volumes
from the command console on each server to verify that
the servers recognize the volumes.
5-6
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Codename: Sopwith Part Number: 252261-002 Last Saved On: 11/8/02 2:57 PM
