HP ProLiant DL360 Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 79 / 112

• If an optional controller is not installed, press F10 during boot.
• If an optional controller is installed, when the system recognizes the controller during POST, press F5 .
For optimum performance, the minimum display settings are 1024 × 768 resolution and 16-bit color. Servers
running Microsoft
®
operating systems require one of the following supported browsers:
• Internet Explorer 6.0 or later
• Mozilla Firefox 2.0 or later
For Linux servers, see the README.TXT file for additional browser and support information.
For more information about the storage controller and its features, select the relevant controller user
documentation on the
Hewlett Packard Enterprise website .
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website .
Automatic Server Recovery
ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such
as a blue screen, ABEND (does not apply to HPE ProLiant DL980 Servers), or panic. A system fail-safe timer,
the ASR timer, starts when the System Management driver, also known as the Health Driver, is loaded. When
the operating system is functioning properly, the system periodically resets the timer. However, when the
operating system fails, the timer expires and restarts the server.
ASR increases server availability by restarting the server within a specified time after a system hang. At the
same time, the SIM console notifies you by sending a message to a designated pager number that ASR has
restarted the system. You can disable ASR from the System Management Homepage or through RBSU.
Automatic Server Recovery 79