HP ProLiant DL345 Gen10 Plus Скачать руководство пользователя страница 57

Страница: 57 / 261

Rack warnings and cautions

WARNING:

When all components are removed, the server weighs 12.57 kg (27.71 lb). When all components

are installed, the server can weigh up to 26.28 kg (57.94 lb).
Before configuring your rack solution, be sure to check the rack manufacturer weight limits and

specifications. Failure to do so can result in physical injury or damage to the equipment and the

facility.

WARNING:

The server is heavy. To reduce the risk of personal injury or damage to the equipment, do the

following:

Observe local occupational health and safety requirements and guidelines for manual

material handling.
Get help to lift and stabilize the product during installation or removal, especially when the

product is not fastened to the rails. The server weighs more than 12.57 kg (27.71 lb), so at

least two people must lift the server into the enclosure together. An additional person may

be required to help align the server if the server is installed higher than chest level.
Use caution when installing the server in or removing the server from the enclosure.
Adequately stabilized the enclosure before extending a component outside the enclosure.

Extend only one component at a time. A enclosure may become unstable if more than one

component is extended.
Do not stack anything on top of rail-mounted component or use it as a work surface when

extended from the rack.

WARNING:

To reduce the risk of personal injury or damage to the equipment, be sure that:

The rack has anti-tip measures in place. Such measures include floor-bolting, anti-tip feet,

ballast, or a combination as specified by the rack manufacturer and applicable codes.
The leveling jacks (feet) are extended to the floor.
The full weight of the rack rests on the leveling jacks (feet).
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple rack installations.

WARNING:

To reduce the risk of personal injury or equipment damage when unloading a rack:

At least two people are needed to safely unload the rack from the pallet. An empty 42U rack

can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and might

become unstable when being moved on its casters.
Never stand in front of the rack when it is rolling down the ramp from the pallet. Always

handle the rack from both sides.

CAUTION:

Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the heaviest item first, and

continue to populate the rack from the bottom to the top.

CAUTION:

Before installing the server in a enclosure, be sure to properly scope the limitations of the enclosure. Before proceeding

with the installation, consider the following:

You must fully understand the static and dynamic load carrying capacity of the enclosure and be sure that it can
accommodate the weight of the server.

Rack warnings and cautions