Storage Controllers
NOTE: A minimum of one Smart Array Controller is ONLY required when purchasing
Hot Plug CTO Chassis Model (P/N 491532-B21) in Step 1.
NOTE: The below storage controllers are intended for use with internal drives in the
Hot Plug CTO Chassis Model (P/N 491532-B21). The HP Smart Array P212
Controller (P/N 491191-B21) is supported in the Non-Hot Plug Model (P/N
491531-B21) for external storage control ONLY.
NOTE: With the HP Smart Array P410 Controller, the addition of the battery backed
cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive
extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at
least 256MB Cache and a Battery is required in addition to the Smart Array
Advanced Pack license (P/N 516471-B21).
NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis,
a HP Smart Array P410 controller must be selected. When selecting the HP Smart
Array P212 Controller (P/N 491191-B21), the controller will be installed in the x16
slot since it has both an internal and external port. This prevents the use of the internal
slot and no PCI-E slots will be available.
HP Smart Array P212/256 MB w/ Battery FIO
491191-B21
HP P410/Zero Memory FIO Smart Array Controller
462860-B21
HP Smart Array P410/256 MB w/Battery FIO
491195-B21
Hot Plug HDD Backplane
Option
NOTE: A minimum of one Hot Plug HDD Backplane option is ONLY required when
purchasing Hot Plug CTO Chassis Model (P/N 491532-B21) in Step 1.
HP 8SFF Hard Drive Cage & Backplane G6, FIO
515938-B21
HP 2 HDD Backplane G6 FIO Kit
NOTE: Supports LFF hard drives only.
518593-B21
HP 4HDD Hot Plug Backplane G6 Kit
NOTE: Supports LFF hard drives only.
512181-B21
Power Supplies
CAUTION: Many HP ProLiant Servers now offer new power options, including
Common Slot Power Supplies. These power supplies come in multiple power ratings
and higher efficiency levels to offer the Right Size solution to fit your configuration. This
provides improved power delivery and the advantage of reclaiming lost power. Prior
to making a power supply selection it is "highly recommended" that the "HP Power
Advisor" is run to determine the right size power supply for your server configuration.
The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor
. In ProLiant
Servers that have more than one power slot (bay), only same size power supplies are
recommended. If non-matched power supplies are inserted you will get errors and
operation will fail.
NOTE: The 400W 1U G6 RPS (P/N: 532092-B21) is limited to the following
configuration support: (1.) NHP SATA Model (P/N: 491531-B21), (2.) Up to 2 60W
Low Voltage processors (P/N: 491507-L21, -B21) (3.) Unbuffered memory (P/N:
500668-B21 or 500670-B21), 4. No graphics cards supported via PCI-e.
HP High Efficiency 500W Multi-output Power Supply Kit
515915-B21
HP High Efficiency 460W Power Supply Kit
535684-B21
HP High Efficiency 750W Power Supply Kit
535683-B21
HP 400W 1U G6 Redundant Power Supply Kit
532092-B21
QuickSpecs
HP ProLiant DL160 Generation 6
Configuration Information - Factory Integrated Models
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009
Page 18
