HP ProLiant DL100 G2 DPSS, Руководство администратора

Страница: 140 / 155

• When con fi guring an SLB team, although connecting team members to a hub is supported, it is
recommended to connect team members to a switch.
• Not all devices made by others are supported or fully certi fi ed for teaming.
Con fi guring the team IP address
Perform the following steps to con fi gure the NIC team IP address:
1. From Control Panel, double-click Network Connections .
2. Right-click the name of the team to be con fi gured, and then click Properties
3. On the General tab, click Internet Protocol (TCP/IP) , and then click Properties .
4. Con fi gure the IP address and any other necessary TCP/IP con fi guration for the team, and then
click OK when fi nished.
NOTE:
For further information on con fi guring the adapter for teaming, load balancing, and VLAN support, see
the online Help on the Broadcom Advanced Control Suite 2 user interface.
Adding a VLAN
BASP also supports adding virtual LANs (VLANs) to a team. This enables the administrator to add
multiple virtual adapters for different subnets. In other words, the storage server can have one network
adapter for multiple subnets. With a VLAN, you can couple the functionality of load balancing for the
load balance members, and you can employ a failover adapter.
Up to 64 VLANs per team (63 VLANs that are tagged and 1 VLAN that is not tagged) can be de
fi ned.
VLANs can only be created when all teams members are Broadcom adapters. Creating a VLAN with a
non-Broadcom adapter will result in an error message being displayed.
NOTE:
If you remove a team, do so only after you remove the individual virtual adapters that are a part of the
team.
NOTE:
For instructions on adding a VLAN, refer to the online Help on the Broadcom Advanced Control Suite
2 user interface.
140 NIC teaming