HP ProLiant BL465c G6, Руководство пользователя

Страница: 46 / 93

Software and configuration utilities 46
also compatible with certain third-party SAN products. For more information, refer to the documentation
that ships with the FCA option.
For optimal SAN connectivity, observe the following guidelines:
•
The FCA option is installed correctly in the server blade. Refer to the documentation that ships with
the FCA option.
•
An FC-compatible interconnect is installed in the enclosure. Refer to the documentation that ships
with the interconnect option.
•
The server blade enclosure management module firmware is up-to-date. Refer to the HP Business
Support Center website (
http://www.hp.com/support ).
•
The server blade is cabled properly to a supported SAN.
•
SAN storage drivers are loaded. Refer to supporting white papers and the HP website
( http://www.hp.com/servers/rdp ).
For SAN configuration information for the server blade, refer to the HP StorageWorks SAN Design
Reference Guide on the HP website
( http://h18000.www1.hp.com/products/storageworks/san/documentation.html ).
Re-entering the server serial number and product ID
After you replace the system board, you must re-enter the server serial number and the product ID.
1.
During the server startup sequence, press the F9 key to access RBSU.
2.
Select the System Options menu.
3.
Select Serial Number . The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded into the system
during the manufacturing process and should NOT be modified. This option
should only be used by qualified service personnel. This value should
always match the serial number sticker located on the chassis.
4.
Press the Enter key to clear the warning.
5.
Enter the serial number and press the Enter key.
6.
Select Product ID .
7.
Enter the product ID and press the Enter key.
8.
Press the Esc key to close the menu.
9.
Press the Esc key to exit RBSU.
10.
Press the F10 key to confirm exiting RBSU. The server will automatically reboot.
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign
RAID levels, and establish online spare configurations.
The utility also provides support for the following functions:
•
Reconfiguring one or more logical drives
•
Viewing the current logical drive configuration
•
Deleting a logical drive configuration