The Command Line Interface
Additional References
Additional information about installing and configuring the GbE2 Interconnect Switch is
available in the following guides, which are located on the ProLiant BL p-Class GbE2
Interconnect Switch Management Utilities and User Documentation CD:
•
•
•
•
•
•
•
•
HP ProLiant BL p-Class GbE2 Interconnect Switch User Guide
HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide
HP ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface Reference
Guide
Connecting to the GbE2 Interconnect Switch
You can access the command line interface in one of the following ways:
Using a console connection via the console port
Using a Telnet connection over the network
Using a Secure Shell (SSH) connection to securely log in over a network
Establishing a Console Connection
To establish a console connection with the GbE2 Interconnect Switch, you need:
A null modem cable with a female DB-9 connector (Refer to the
HP ProLiant BL
p-Class GbE2 Interconnect Switch User Guide
for more information.)
An ASCII terminal or a computer running terminal emulation software set to the
parameters shown in the table below
Table 1-1: Console Configuration Parameters
Parameter Value
Baud Rate
9600
Data Bits
8
Parity None
Stop Bits
1
Flow Control
None
1-2
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL
Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:46 PM
