manualshive.com logo in svg

HP ProDesk 400 G7 SFF, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProDesk 400 G7 SFF Скачать руководство пользователя страница 114

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in some situations.

●

HP PC Hardware Diagnostics UEFI is not included in the preinstallation image.

●

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.

●

The hard drive is damaged.

NOTE:

The HP PC Hardware Diagnostics UEFI downloading instructions are provided in English only, and you 

must use a Windows computer to download and create the HP UEFI support environment because only .exe files 
are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive, follow this procedure.

1.

Go to 

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

2.

Select Download HP Diagnostics UEFI, and then select Run.

Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only)

You can download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB 
flash drive.

NOTE:

For some products, you might have to download the software to a USB flash drive by using the product 

name or number.

1.

Go to 

http://www.hp.com/support

.

2.

Enter the product name or number, select your computer, and then select your operating system.

3.

In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI 
Diagnostics version for your computer.

106 Chapter 9   Using HP PC Hardware Diagnostics

ENWW

Содержание ProDesk 400 G7 SFF









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды