HP ProCurve 1600M, Руководство по управлению и настройке

Страница: 372 / 690

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
ProCurve(config)# show snmp-server
SNMP Communities
Community Name MIB View Write Access
---------------- -------- ------------
public Manager Unrestricted
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Address Community Events Sent Notify Type Retry Timeout
--------------------- --------------- ----------- ----------- ----- --------
15.28.333.456
guest All inform 3 15
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy : Default rfc1517
Trap Pdu Source-IP Information
Figure 14-12. Example Showing SNMP Inform Option Enabled
Advanced Management: RMON
The switch supports RMON (Remote Monitoring) on all connected network
segments. This allows for troubleshooting and optimizing your network.
The following RMON groups are supported:
■
Ethernet Statistics (except the numbers of packets of different frame sizes)
■
Alarm
■
History (of the supported Ethernet statistics)
■
Event
The RMON agent automatically runs in the switch. Use the RMON
management station on your network to enable or disable specific RMON
traps and events. Note that you can access the Ethernet statistics, Alarm, and
Event groups from the ProCurve Manager network management software. For
more on ProCurve Manager, visit the ProCurve Networking web site at
www.procurve.com
Click on products index , then look for the ProCurve Manager topic under the
Network Manager bar.
14-28