HP ProBook 470 G1 Скачать руководство пользователя страница 98

Страница: 98 / 149

Computer Setup (BIOS), MultiBoot, and

HP PC Hardware Diagnostics (UEFI) in

Windows 8

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input

and output devices on the system (such as disk drives, display, keyboard, mouse, and printer).

Computer Setup includes settings for the types of devices installed, the startup sequence of the

computer, and the amount of system and extended memory.

NOTE:

Use extreme care when making changes in Computer Setup. Errors can prevent the

computer from operating properly.

Starting Computer Setup

NOTE:

An external keyboard or mouse connected to a USB port can be used with Computer Setup

only if USB legacy support is enabled.
To start Computer Setup, follow these steps:

Turn on or restart the computer, and then press

esc

while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

Press

f10

to enter Computer Setup.

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:

Turn on or restart the computer, and then press

esc

while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

NOTE:

You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the

keyboard to navigate and make selections in Computer Setup.

Press

f10

to enter Computer Setup.

●

To select a menu or a menu item, use the

tab

key and the keyboard arrow keys and then

press

enter

, or use a pointing device to click the item.

●

To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the

screen, or use the up arrow key or the down arrow key on the keyboard.

●

To close open dialog boxes and return to the main Computer Setup screen, press

esc

, and

then follow the on-screen instructions.

86 Chapter 8 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI) in

Windows 8

Содержание ProBook 470 G1






















































































































































Результаты поиска

Содержание ProBook 470 G1

Отзывы:

Похожие инструкции для ProBook 470 G1

Бренды по названию

Популярные бренды

HP ProBook 470 G1, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProBook 470 G1

Отзывы:

Похожие инструкции для ProBook 470 G1

Бренды по названию

Популярные бренды