HP ProBook 450 G2 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 169

HP ProBook 450 G2 Скачать руководство пользователя страница 27

Component

Description

Battery lock latch

Locks the battery in the battery bay.

(4)

Service door

Provides access to the wireless LAN (WLAN) module slot,
the WWAN module slot, and SIM slot.

CAUTION:

To prevent an unresponsive system, replace

the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore computer
functionality, and then contact support through HP
Support Assistant.

To access Help and Support in Windows 7: Select Start >
Help and Support.

To access HP Support Assistant: in Windows 8.1: From the
Start screen, select the HP Support Assistant app.

Windows 10:

Type

support

in the taskbar search box, and then select

the HP Support Assistant app.

- or -

Click the question mark icon in the taskbar.

(5)

Battery bay

Holds the battery.

(6)

SIM slot

Supports a wireless subscriber identity module (SIM). The
SIM slot is located under the service door.

Front

Component

Description

(1)

Hard drive light

●

Blinking white: The hard drive is being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked the
hard drive.

(2)

Memory card reader

Reads optional memory cards that store, manage, share,
or access information.

Front

15

«
...
25
26
27
28
29
...
»

Содержание ProBook 450 G2










































































































































































Отзывы:

Нет отзывов