Speaker
To remove the speaker, use this procedure and illustration.
Table 6-9
Speaker description and part number
Description
Spare part number
Speaker
M21400-001
Before removing the speaker, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 38
).
2.
Remove the bottom cover (see
3.
Remove the battery (see
).
4.
Remove the system board (see
).
NOTE:
Be sure that the RTC battery remains connected to the system board.
Remove the speaker:
1.
Remove the Phillips M2.0 × 2.0 screw (1) that secures the speaker to the computer.
2.
Lift the speaker up and out of the computer (2). When installing the speaker, be sure that the rubber cap
in installed on the right end of the speaker (3) .
Reverse this procedure to install the speaker.
Power connector cable
To remove the power connector cable, use this procedure and illustration.
58
Chapter 6 Removal and replacement procedures for authorized service provider parts
Содержание ProBook 445 G9
Страница 4: ...iv Safety warning notice ...
Страница 6: ...vi Important notice about Customer Self Repair parts ...