HP ProBook 430 G1 Скачать руководство пользователя страница 18

Страница: 18 / 139

Display - SLED models

Component

Description

(1)

WLAN antennas (2)* (select models only)

Send and receive wireless signals to communicate with wireless
local area networks (WLAN).

(2)

Internal microphones (2)

Record sound.

(3)

Webcam light

On: The webcam is in use.

(4)

Webcam

Records video and captures still photographs.

(5)

Internal display switch

Turns off the display or initiates Suspend if the display is closed
while the power is on.

NOTE:

The display switch is not visible from the outside of the

computer.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antennas free from obstructions. To see wireless regulatory notices, see the section of the

Regulatory, Safety, and

Environmental Notices

that applies to your country or region.

Chapter 2 External component identification

Содержание ProBook 430 G1












































































































































Результаты поиска

Содержание ProBook 430 G1

Отзывы:

HP ProBook 430 G1, Руководство по техническому обслуживанию и ремонту, Страница: 18 / 139

Результаты поиска

Содержание ProBook 430 G1

Отзывы: