HP PRINTER SERIES D2600 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 76

background image

Powering off disk enclosures

IMPORTANT:

Always power off disk enclosures after controller enclosures and servers.

IMPORTANT:

When installing a hot-pluggable component, such as a disk drive, it is not necessary to power down
the enclosure.

To power off a disk enclosure:

1.

Power off any attached servers. For more information, see the server documentation.

2.

Power off the controller enclosure (if included in the configuration.) For more information, see the
controller enclosure documentation.

3.

Power off the disk enclosures. Press and hold the power on/standby button on the disk enclosure
for three seconds or until the system power LED changes from green to amber.

4.

Disconnect power cords.

The system is now without power.

Updating disk enclosure firmware

After initial installation and periodically after that, verify that all devices in the configuration have the
latest available firmware installed.

To determine currently-installed firmware and software versions

on system components, use

management software utilities such as the HP System Management Homepage, HP Systems Insight
Manager (HP SIM), Storage Management Utility (SMU), or Command Line Interface (CLI).

To obtain the latest-available firmware and software,

see the HP website:

http://www.hp.com/

To perform the update,

follow the procedures for your environment:

•

For server connect environments, execute the downloaded Smart Component using the Firmware
Maintenance CD.

•

For controller enclosure connect environments, install the firmware download using the Storage
Management Utility (SMU) or Command Line Interface (CLI).

NOTE:

You can receive proactive support alerts, such as Customer Advisories, as well as updates on drivers,
software, firmware, and customer replaceable components, via e-mail through HP Subscriber's Choice.
Sign up for Subscriber's Choice at the following HP website:

http://www.hp.com/go/myadvisory

and select the appropriate product.

Operation and management

44

«
...
42
43
44
45
46
...
»

Содержание PRINTER SERIES D2600













































































Отзывы:

Нет отзывов

Похожие инструкции для PRINTER SERIES D2600

Бренд: LXE Страницы: 220

Бренд: Conrad Страницы: 4

Бренд: Red4Power Страницы: 28

Бренд: Icy Box Страницы: 5

Purifier 3970200

Бренд: Labconco Страницы: 65

Бренд: TOOQ Страницы: 22

Бренд: TOOQ Страницы: 22

Бренд: Aukey Страницы: 18

Бренд: Apricorn Страницы: 12

Бренд: Pulsar Страницы: 4

Бренд: Pulsar Страницы: 4

FireDock FR-DK1

Бренд: Ratoc Systems Страницы: 21

Бренд: Hama Страницы: 38

Бренд: Hama Страницы: 12

Бренд: hager Страницы: 127

Mercury Elite Pro Classic

Бренд: OMC Страницы: 2

Chaser A41 VP2000 Series

Бренд: Thermaltake Страницы: 12

Бренд: Inovonics Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды