HP PRINTER SERIES D2600 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 76

background image

Connecting power cords

When connecting power cords, use the cords shipped with the disk enclosure.

The power cord should be approved for use in your country. The power cord must be rated for the
product and for the voltage and current marked on the electrical ratings label of the product. The
voltage and current rating for the cord should be greater than the voltage and current rating marked
on the product. In addition, the diameter of the wire must be a minimum of 1.00 mm

2

or 18 AWG,

your maximum length may be up to 3.66 m (12 ft).

After power is supplied to the disk enclosure, the power supply automatically senses the input voltage
and the power supply LED illuminates as solid amber.

To protect the system from power-failure-related downtime, each disk enclosure ships standard with
a redundant power supply. Depending how you connect the power supplies to the power source,
you can eliminate downtime caused by power-related failures.

Level of Protection

Connection Method

Protects you from downtime when one of the disk enclosure power supplies fails.
The remaining power supply/fan module can operate the disk enclosure until you
install a replacement module.

Connected to:

•

one power source

Protects you from downtime when one of the disk enclosure power supplies fails.
Protects you from data loss when

one

of your power sources fails, due to a pulled

cable or tripped breaker.
The remaining power source can power the disk enclosure until the failed power
source is restored or relocated. Depending on the cause and duration of the power
outage, you can use this time to properly shut down your storage sub-system.

Connected to:

•

two separate power
sources

Protects you from downtime when one of the disk enclosure power supplies fails.
Protects you from data loss when

one

or

both

of your power sources fails, due to

a pulled cable, tripped breaker, or local power outage.
The remaining power source or the UPS will power the disk enclosure until power
is restored to the source. Depending on the cause and duration of the power
outage, you can use this time to properly shut down your storage sub-system.

Connected to:

•

two UPS

•

two separate power
sources

WARNING!

To reduce the risk of electric shock or damage to the equipment:

•

Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

•

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

•

Route the power cord so that it is not likely to be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord is attached
to the disk enclosure.

Installation

38

«
...
36
37
38
39
40
...
»

Содержание PRINTER SERIES D2600













































































Отзывы:

Нет отзывов

Похожие инструкции для PRINTER SERIES D2600

Бренд: ANTEK Страницы: 11

Бренд: geratech Страницы: 26

Бренд: ICC Страницы: 2

Бренд: nCase Страницы: 48

Swift Case PRO USB 3.0

Бренд: Sharkoon Страницы: 8

CA-1J7-00M1WN-00

Бренд: Thermaltake Страницы: 12

Бренд: cable matters Страницы: 12

Бренд: TRI-M ENGINEERING Страницы: 8

cinch ModICE LE 30 I/O

Бренд: BEL Страницы: 11

Бренд: NAIM Страницы: 30

Бренд: Mustee Страницы: 4

Domera DJB-115W

Бренд: dallmeier Страницы: 32

Бренд: Panduit Страницы: 11

Бренд: Icy Box Страницы: 10

Бренд: Asus Страницы: 13

90DC00B0-B39000

Бренд: Asus Страницы: 41

Бренд: Asus Страницы: 28

TUF Gaming GT301

Бренд: Asus Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды