HP PRINTER SERIES D2600 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 76

background image

Installing disk drives in the enclosure

Disk drive options

Depending on the enclosure model, 12 or 25 disk drives can be installed in the enclosure.

A variety of disk drive models are supported for use, including dual-ported and single-ported models.
For more information about supported disk drives, see the QuickSpecs for the disk enclosure, available
on the D2000 website:

http://www.hp.com/go/D2000

.

Disk drive guidelines

CAUTION:
•

Follow industry-standard practices when handling disk drives. Internal storage media can be
damaged when drives are shaken, dropped, or roughly placed on a work surface.

•

When installing a disk drive, press firmly to make sure the drive is fully seated in the drive bay
and then close the latch handle.

•

When removing a disk drive, press the release button and pull the drive only slightly out of the
enclosure. Then, to allow time for the internal disk to stop rotating, wait approximately 10 seconds
before completely removing the drive from the enclosure.

•

Always populate hard drive bays starting with the lowest bay number. If only one hard drive is
used, install it in the bay with the lowest device number.

•

Disk drives are hot-pluggable.

•

SAS and SATA disk drives may be installed in the same enclosure, but can not be included in the
same RAID logical volume.

Installing a disk drive

CAUTION:

To prevent improper cooling and thermal damage, operate the enclosure only when all bays are
populated with either a component or a blank.

1.

Remove the drive blank.

Installation

32

«
...
30
31
32
33
34
...
»

Содержание PRINTER SERIES D2600













































































Отзывы:

Нет отзывов

Похожие инструкции для PRINTER SERIES D2600

Бренд: OEZ Страницы: 12

Distri RZG-Z-1.8

Бренд: OEZ Страницы: 8

Бренд: OEZ Страницы: 10

Gaming X II Series

Бренд: Xigmatek Страницы: 14

Power System 5888

Бренд: IBM Страницы: 66

Netfinity FAStT500

Бренд: IBM Страницы: 83

RocketStor 6418AS

Бренд: HighPoint Страницы: 4

RocketStor RS6124V

Бренд: HighPoint Страницы: 53

Бренд: APLIC Страницы: 20

Бренд: Peavey Страницы: 12

Бренд: RS PRO Страницы: 2

Бренд: L-Acoustics Страницы: 52

kudo multi-mode wst

Бренд: L-Acoustics Страницы: 64

LINKnet OFR1000

Бренд: Kaval Страницы: 26

Бренд: Pulsar Страницы: 7

Бренд: Leviton Страницы: 27

Бренд: hager Страницы: 16

Бренд: Rosewill Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды