HP PRINTER SERIES D2600 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 76

background image

Storage planning considerations include:

•

System and performance expectations

•

Striping methods

•

RAID levels

•

Disk drive sizes and types

•

Spare drives

•

Array sizing (capacity)

NOTE:

For the minimum supported configuration, and other configuration information, see the QuickSpecs
for the disk enclosure.

System and performance expectations

To help determine the best way to configure your storage, rank the following three storage
characteristics in order of importance:

•

Fault tolerance (high availability)

•

I/O performance

•

Storage efficiency

With priorities established, you can determine which striping method and RAID level to use; some
configuration methods offer greater fault tolerance, while other configuration methods offer better I/O
performance or storage efficiency.

Striping methods

There are two methods for configuring the physical layout of the disk arrays:

•

Vertical striping—the RAID array uses one physical drive from each disk enclosure.

•

Horizontal striping—the RAID array uses multiple drives contained within one or more disk enclos-
ures.

RAID levels

Controllers use RAID technology to group multiple disk drives together in larger logical units (LUNs).

Key RAID methods include the use of data striping, data mirroring, and parity error checking. Data
striping improves speed by performing virtual disk I/O with an entire group of physical disks at the
same time. Mirroring provides data redundancy by storing data and a copy of the data. Parity error
checking provides automatic detection and correction if corruption of a physical disk occurs.

Depending on the host environment, the following RAID levels are supported with this disk enclosure:
RAID0, RAID1, RAID5 and RAID6 with ADG. Each level uses a different combination of RAID methods
that impact data redundancy, the amount of physical disk space used, and I/O speed. After you
create a LUN, you cannot change the RAID level.

The following table compares the different RAID levels.

Installation

26

«
...
24
25
26
27
28
...
»

Содержание PRINTER SERIES D2600













































































Отзывы:

Нет отзывов

Похожие инструкции для PRINTER SERIES D2600

STI-1229HTR-HAZ

Бренд: Safety Technology International Страницы: 8

Бренд: Center Страницы: 11

Бренд: Apevia Страницы: 12

BFC-SDO-150-KKXBR-RP

Бренд: BitFenix Страницы: 15

Бренд: Stardom Страницы: 37

Bass Slammer TTP10

Бренд: MTX Страницы: 2

Бренд: DAN Страницы: 28

Бренд: Fantec Страницы: 2

Бренд: Fantec Страницы: 2

Бренд: Icy Box Страницы: 2

Бренд: Icy Box Страницы: 12

Бренд: Icy Box Страницы: 16

Бренд: Icy Box Страницы: 20

XCubeDAS XD5312D

Бренд: Qsan Страницы: 49

Бренд: Rittal Страницы: 32

Icy Box IB-1916M-C32

Бренд: RaidSonic Technology Страницы: 16

Бренд: NZXT Страницы: 15

Бренд: NZXT Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды