Taking Still, Burst and Timelapse Photos
HP PhotoSmart C500 Digital Camera User’s Guide
35
Taking Still, Burst and Timelapse Photos
Taking Still Photos
Use the
Still
Still
Still
Still
setting to take one photo each time you press the
Shutter
Shutter
Shutter
Shutter
button.
To take a Still photo:
To take a Still photo:
To take a Still photo:
To take a Still photo:
1.
Remove the lens cover.
2. Turn the camera on and turn the camera mode dial to
Rec
Rec
Rec
Rec
.
The status LCD displays the approximate number of photos
available on the memory card. The camera is not ready until
this number appears.
3. Adjust your camera settings as needed. See “Adjusting the
Camera Settings” on page 42 for details.
4. Press the
color LCD on/off
color LCD on/off
color LCD on/off
color LCD on/off
button to turn the color LCD on, then press the left
soft key until the
Still
Still
Still
Still
icon appears on the lower overlay bar.
Tip:
To conserve battery power, turn the color LCD off after you choose the photo type.
5. Frame your subject in the viewfinder, then press and hold the
Shutter
Shutter
Shutter
Shutter
button 1/2 way down to allow the camera
to adjust the focus and exposure. If you see an orange light to the left of the viewfinder, you may need to
change the flash setting to adjust for the lighting conditions.
Status LCD
Shutter button
On/off button
Camera mode dial
Number of
photos available
Still icon