5–22
Maintenance and Service Guide
Removal and Replacement Procedures
7. Disconnect the LED board cable
1
from the system board
and remove the cable from the clip in the top cover.
✎
The LED board cable is included in the Miscellaneous Cable Kit,
spare part number 344851-001. The LED board is included with
the top cover.
8. Disconnect the display lid switch module cable
2
from the
display lid switch module.
9. Lift the front edge of the top cover
3
until the TouchPad
cable
4
is accessible.
10. Disconnect the TouchPad cable from the low insertion force
(LIF) connector on the system board.
11. Remove the top cover
5
.
Removing the Top Cover
Reverse the above procedure to install the top cover.
333621-001.book Page 22 Wednesday, September 17, 2003 12:24 PM