HP Pavilion x360 m1-u000, Руководство по техническому обслуживанию и ремонту

Страница: 45 / 90

TouchPad cable
Description Spare part number
For use only on computer models equipped with an Intel Core processor 856061-001
For use only on computer models equipped with an Intel Pentium or Intel Celeron processor 856062-001
Before removing the TouchPad cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 32 ).
Remove the TouchPad cable:
1. Turn the keyboard/top cover upside down with the front toward you.
2. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect
the TouchPad cable (2) from the TouchPad.
3. Remove the TouchPad cable (3).
Reverse this procedure to install the TouchPad cable.
Component replacement procedures 37