manualshive.com logo in svg

HP Pavilion x360 14 Series, Руководство по техническому обслуживанию и ремонту, Страница: 70 / 105

Поделиться
Скачать
HP Pavilion x360 14 Series Скачать руководство пользователя страница 70

System board

NOTE:

The system board spare part kit includes the processor, a graphics subsystem with UMA memory, and 

replacement thermal material.

Table 5-9

  System board spare part information

Description

Spare part number

For use only on computer models equipped with WWAN capability:

Equipped with an Intel Core i5-1035G1 processor and the Windows 10 operating system

L96512-601

Equipped with an Intel Core i5-1035G1 processor and a non-Windows 10 operating system

L96512-001

For use only on computer models not equipped with WWAN capability:

Equipped with an Intel Core i7-1065G7 processor and the Windows 10 operating system

L96513-601

Equipped with an Intel Core i7-1065G7 processor and a non-Windows 10 operating system

L96513-001

Equipped with an Intel Core i5-1035G1 processor and the Windows 10 operating system

L96511-601

Equipped with an Intel Core i5-1035G1 processor and a non-Windows 10 operating system

L96511-001

Equipped with an Intel Core i3-1005G1 processor and the Windows 10 operating system

L96510-601

Equipped with an Intel Core i3-1005G1 processor and a non-Windows 10 operating system

L96510-001

Equipped with an Intel Pentium Silver N5030 processor and the Windows 10 operating system

L96514-601

Equipped with an Intel Pentium Silver N5030 processor and a non-Windows 10 operating system

L96514-001

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 39

), and then remove the following 

components:bbsfcdhs

a.

Battery (see 

Battery on page 41

)

b.

Solid-state drive (see 

Solid-state drive on page 44

)

c.

Fan (see 

Fan on page 60

)

NOTE:

When replacing the system board, make sure the following components are removed from the 

defective system board and installed on the replacement system board:wwm

Remove the system board:

1.

Disconnect the following cables from the system board:

(1) Power connector cable

(2) WLAN antenna cables

62

Chapter 5   Removal and replacement procedures

Содержание Pavilion x360 14 Series










































































































Отзывы:

Нет отзывов