Reverse this procedure to install the speakers.
Power connector cable
Description
Spare part number
Power connector cable
808155-010
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
), and then remove the following components:
a.
Battery (see
)
b.
WLAN module (see
)
c.
Fan (see
)
d.
System board (see
)
Remove the power connector cable:
▲
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
40
Chapter 5 Removal and replacement procedures
Содержание pavilion Series
Страница 4: ...iv Safety warning notice ...
Страница 7: ...11 Recycling 64 Index 65 vii ...
Страница 8: ...viii ...
Страница 21: ...Computer major components Computer major components 13 ...