TouchPad cable
Description
Spare part number
TouchPad cable (includes double-sided adhesive)
856203-001
Before removing the TouchPad cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
), and then remove the following components:
a.
Battery (see
)
b.
WLAN module (see
)
c.
Fan (see
)
d.
System board (see
)
Remove the TouchPad cable:
▲
Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect
the TouchPad cable (2) from the system board.
Reverse this procedure to install the TouchPad cable.
38
Chapter 5 Removal and replacement procedures
Содержание pavilion Series
Страница 4: ...iv Safety warning notice ...
Страница 7: ...11 Recycling 64 Index 65 vii ...
Страница 8: ...viii ...
Страница 21: ...Computer major components Computer major components 13 ...
