HP PAVILION Gaming 17-ak000 страница 90 Скачать руководство пользователя | Manualshive

Страница: 90 / 108

background image

website. Go to

http://www.hp.com/support

, select your country or region, and follow the on-screen

instructions.

IMPORTANT:

HP Recovery Manager does not automatically provide backups of your personal data. Before

beginning recovery, back up any personal data you want to retain.

Using HP Recovery media, you can choose from one of the following recovery options:

NOTE:

Only the options available for your computer display when you start the recovery process.

●

System Recovery—Reinstalls the original operating system, and then configures the settings for the
programs that were installed at the factory.

●

Factory Reset—Restores the computer to its original factory state by deleting all information from the
hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that
was installed at the factory.

The HP Recovery partition (select products only) allows System Recovery only.

Using the HP Recovery partition (select products only)

The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a
recovery USB flash drive. This type of recovery can be used only if the hard drive is still working.

To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before

beginning these steps (select products only).

1.

Type

recovery

in the taskbar search box, select Recovery Manager, and then select HP Recovery

Environment.

‒

or –

For computers or tablets with keyboards attached, press

f11

while the computer boots, or press and

hold

f11

as you press the power button.

For tablets without keyboards:

●

Turn on or restart the tablet, and then quickly hold down the volume up button; then select f11.

‒

or –

●

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.

2.

Select Troubleshoot from the boot options menu.

3.

Select Recovery Manager, and then follow the on-screen instructions.

Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your system does
not have an HP Recovery partition or if the hard drive is not working properly.

1.

If possible, back up all personal files.

2.

Insert the HP Recovery media, and then restart the computer.

NOTE:

If the computer does not automatically restart in HP Recovery Manager, change the computer

boot order. See

Changing the computer boot order on page 83

.

3.

Follow the on-screen instructions.

82

Chapter 8 Backing up, restoring, and recovering

«
...
88
89
90
91
92
...
»

Содержание PAVILION Gaming 17-ak000













































































































Отзывы:

Нет отзывов

Похожие инструкции для PAVILION Gaming 17-ak000

Toughbook CF-18BCAGCMM

Бренд: Panasonic Страницы: 52

Бренд: UMAX Technologies Страницы: 50

Бренд: i-Life Страницы: 12

Toughbook CF-48P4FAUEM

Бренд: Panasonic Страницы: 36

Toughbook CF-28PMJAZQM

Бренд: Panasonic Страницы: 36

Toughbook CF-73XCVTSBM

Бренд: Panasonic Страницы: 44

Toughbook CF-74JCJBDxM

Бренд: Panasonic Страницы: 69

Toughbook CF-52EKMxDxM

Бренд: Panasonic Страницы: 88

Бренд: Brother Страницы: 258

Бренд: Dell Страницы: 114

Бренд: Dell Страницы: 75

Бренд: Dell Страницы: 94

Бренд: Dell Страницы: 136

Бренд: Dell Страницы: 51

Бренд: Dell Страницы: 63

Бренд: Dell Страницы: 76

Бренд: Dell Страницы: 65

Бренд: Dell Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды