manualshive.com logo in svg

HP Pavilion DV6-1030, Руководство пользователя, Страница: 100 / 129

Поделиться
Скачать
HP Pavilion DV6-1030 Скачать руководство пользователя страница 100

Registering fingerprints

A Fingerprint Reader allows you to log on to Windows using a fingerprint that you have registered using
DigitalPersona Personal software, instead of using a Windows password.

To register one or more fingerprints:

1.

In Windows, click the 

DigitalPersona Personal

 icon in the notification area at the far right of the

taskbar.

2.

Read the welcome text, and then click 

Next

.

The Verify Your Identity window appears.

3.

Type your Windows password, if one has been established, and then click 

Next

.

NOTE:

If you do not have a Windows password, the Protect Your Windows Account window

appears. Create a Windows password at this time, or skip this step by clicking 

Next

. However,

setting a Windows password optimizes the security of the computer.

The Fingerprint Registration Training window appears.

4.

View the demonstration, and then click 

Next

.

The Register a Fingerprint window appears.

5.

Click the finger on the screen that corresponds to the finger you want to register.

The next window appears, outlining that finger in green.

6.

Slowly swipe your chosen finger over the Fingerprint Reader.

NOTE:

 If the swipe is not completed correctly, a message explains why the swipe was

unsuccessful.

NOTE:

For best results, swipe the same finger in the same direction each time you use the

Fingerprint Reader.

7.

Continue swiping the same finger over the Fingerprint Reader until you have completed four
successful swipes.

When the fingerprint is registered successfully, the Register a Fingerprint window appears, allowing
you to register more fingerprints. Repeat steps 5 through 7 to register additional fingerprints.

8.

When you are finished registering fingerprints, click 

Next

.

If you register only one fingerprint, a message recommends that you register additional fingerprints.
Click 

Yes

 to register more fingerprints, and then repeat steps 1 through 8 for each fingerprint

registered.

– or –

Click 

No

 if you do not want to register additional fingerprints. The Registration Complete window

appears.

9.

Click 

Finish

.

NOTE:

Repeat steps 1 through 9 for each additional user.

90

Chapter 11   Security

Содержание Pavilion DV6-1030


































































































































Отзывы:

Нет отзывов