HP OmniBook XE2, Руководство оценщика

Страница: 74 / 106

Using Windows NT 4.0
Using Windows 2000
7-2
Using Windows NT 4.0
Windows NT 4.0 with Service Pack 5.0 is fully supported on the OmniBook
XE2. The following procedure installs a retail version of Windows NT 4.0 and
configures the appropriate device drivers.
Windows NT 4.0 is not Advanced Power Management (APM) aware or Plug
and Play (PnP) compatible. If you are not using the Windows NT 4.0
OmniBook Mobile Enhancements, the following will occur:
•
PC Cards (PCMCIA) cannot be hot swapped into any laptop with
Windows NT. Windows NT 4.0 does not support dynamic allocation of
resources. PC Cards must be inserted into the unit before booting.
•
PC Card sockets are not enabled after resuming. PC Cards are inoperable
after a true suspend then resume cycle. Rebooting restarts the sockets.
•
The operating system’s clock is stopped when suspended and does not re-
synchronize with the hardware clock when resuming. When users resume
NT’s clock starts up exactly where it was when they suspended. Rebooting
resets the clock.
Requirements
•
OmniBook XE2
•
OmniBook Drivers for Windows NT 4.0 (These drivers are available in a
self-extracting archive on the Internet at
www.hp.com/go/omnibook . They
will expand to to a default location in \OMNIBOOK\DRIVERS.)
•
Retail Windows NT Workstation CD.