manualshive.com logo in svg

HP Omen series, Руководство по техническому обслуживанию и ремонту, Страница: 59 / 96

Поделиться
Скачать
HP Omen series Скачать руководство пользователя страница 59

Heat sink for hybrid graphics memory

Description

Spare part number

Heat sink for products with NVIDIA GeForce GTX 950M/960M/965M hybrid graphics

856668-001

Heat sink for products with AMD Radeon hybrid graphics 

901922-001

Heat sink for products with NVIDIA GeForce GTX 1050/1050Ti hybrid graphics 

920563-001

Before removing the heat sink for hybrid graphics memory, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the base enclosure (see 

Base enclosure on page 32

).

5.

Disconnect the battery (see 

Battery on page 34

).

Remove the heat sink for hybrid graphics memory:

1.

Remove the 6 Phillips M2.0 screws (1) securing the heat sink.

2.

Carefully lift the heat sink (2) to remove it from the system board.

Component replacement procedures

49

Содержание Omen series

































































































Отзывы:

Нет отзывов