manualshive.com logo in svg

HP mt245, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP mt245 Скачать руководство пользователя страница 32

Battery

Description

Spare part number

4-cell, 41-Whr, 2.8-Ah Li-ion battery

807957-001

Before disassembling the computer, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

To remove the battery:

1.

Position the computer upside down on a flat surface.

2.

Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.

3.

Remove the battery from the computer (3).

24

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Содержание mt245



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды