manualshive.com logo in svg

HP mt22, Руководство по техническому обслуживанию и ремонту, Страница: 9 / 105

Поделиться
Скачать
HP mt22 Скачать руководство пользователя страница 9

1

Product description

Table 1-1

  Product components and their descriptions

Category

Description

Product Name

HP mt22 Mobile Thin Client

Processors

10th generation, Intel® processor (15 W)

Celeron® 5205U, 1.9 GHz, dual core turbo, 2 MB L3 cache; Intel UHD Graphics

Graphics

Integrated Intel UMA Graphics

Intel UHD Graphics

Supports 3 independent displays when on the HP USB-C Dock G4; Max resolution = 4K @ 30 Hz 
(DisplayPort 1) or 4K @ 30 Hz (DisplayPort 2)

Supports 3 independent displays when on the HP Thunderbolt™ Dock 120 W (using USB-C); Max resolution 
= 4K @ 30 Hz (DisplayPort 1) or 4K @ 30 Hz (DisplayPort 2)

Panel

35.6 cm (14.0 in), LED backlight, antiglare, nontouch

High definition (HD) (1366 × 768), SVA, 45% CG, eDP, slim, 220 nits

HD, SVA, 45% CG, eDP, slim, 220 nits, with HD camera

Full high definition (FHD) (1920 × 1080), UWVA, 72% CG, eDP + PSR, flat, 1000 nits, privacy

35.6 cm (14.0 in), LED backlight, antiglare, touch screen

FHD, UWVA, 45% CG, eDP, slim, 250 nits, with HD camera, Touch-on Panel (TOP)

Memory

Two customer-accessible memory module slots supporting up to 8 GB of RAM

Supports dual-channel memory

PC4-2400, DDR4 SODIMMs

Supports the following configurations:

●

8192 MB (4096 × 2)

●

4096 MB (4096 × 1)

Primary M.2 storage

Supports the following M.2 2280 solid-state drive:

●

128 GB, SATA, TLC

Audio/Visual

Audio controls

Integrated dual-array microphone

Integrated mono microphone

Integrated camera (720p HD)

Camera privacy cover

Supports WDR (Wide Dynamic Range)

Audio-out (headphone)/audio-in (microphone) combo jack

1

Содержание mt22










































































































Отзывы:

Нет отзывов