HP MSR SERIES, Руководство по настройке

Страница: 796 / 889

779
Figure 807 Configuring an access number
a. Type 30000 for Number ID .
b. Type 300 for Number .
c. Select reject-call from the Bind to Menu list.
d. Click Apply .
For other settings, see Configuring Router B .
Verifying the configuration
Dial number 300 at Telephone A. Router B plays the audio file bye.wav , and then terminates the call.
Configure a call node, jump node, and service node
Network requirements
As shown in Figure 808 , configure an IVR access number and configure a call node, jump node, and
service node on Router B to meet the following requirements:
After the subscriber dials 300 at Telephone A, Router B plays the audio file
welcome.wav . Then,
• If the subscriber presses the * key at Telephone A, the call jumps to the service node and the
subscriber hears voice prompts of the audio file bye.wav . After that, the service node releases the
call.
• If the subscriber presses the # key at Telephone A, the call jumps to the call node and the subscriber
hears the voice prompts of the audio file call.wav . After that, if the subscriber dials 1, Telephone B
rings.